how do i change wiper stalk ?? [Archive] - CORSA-D|UK

: how do i change wiper stalk ??



Tim Davies-Moss
26-06-2011, 17:54
how do i get my old wiper stalk out to put a new one in that has the MPG button on it ??

i was told i dont need to remove the steering wheel but not sure now

Tim Davies-Moss
26-06-2011, 19:11
Aha.. found the answer ...

Right, remove the column surround (2 screws behind black covers behind the steering wheel and 1 T20 Torx screw underneath) first. If you look at the bottom of the indicator stalk there's a small narrow groove, insert a long thin rod, l used welding wire and gently pull on the stalk and it should pop out. Insert the new stalk and insert the wiring plug into the obvious socket. Rebuild and voila!


all i need to do now is activate it with Tech2

mike183
26-06-2011, 19:49
Stampede on here does Tech2 if you need someone :thumbs:

Tim Davies-Moss
26-06-2011, 19:50
Stampede on here does Tech2 if you need someone :thumbs:

Cheers Mike

mike183
27-06-2011, 17:53
Cheers Mike

No problem :)

rale1410
02-10-2012, 16:32
Hi guys,

i'm with this forum for quite some time, reading and waiting for my chance to ask something... And - the time is now! :)

I've managed to acquire new wiper stalk with driver information switch on it, did everything that Tim said, but i couldn't find where is that socket where
should wiring plug in??? Could someone tell me where is that socket?

Is it possible that my corsa d don't have that socket? :(

rale1410
02-10-2012, 20:44
Guys,

i''ve tried one more time and managed to find socket... Since my corsa is LHD i had to put all the way down that plastic cover under the steering wheel, and only then that socket was visible...

Thank's anyway! :)