Scuttle panel removal

User Tag List

Results 1 to 2 of 2

Thread: Scuttle panel removal

  1. #1

    Join Date
    06-06-2017
    Posts
    292

    Scuttle panel removal

    Hey guys.

    Have a Corsa D 1.2 sxi 2013.

    I'm trying to figure out removal of the scuttle panel so I can see the wiper motor.

    I'm expecting to see some screws for.removal but cannot see any? Surely it's not as simple as remove wiper blades and then pull panel off. Just don't want to break anything

    Any help would be great.

    Sent from my SM-G900F using Tapatalk

  2. Remove Advertisements
    UKCorsa-D.com
    Advertisements
     

  3. #2

    Join Date
    22-01-2015
    Location
    Inverurie
    Age
    38
    Posts
    528
    It is that simple.

    The scuttle panel clips into the bottom of the windscreen (there is a channel on the underside) and its just held in place under the bonnet by the rubber weather seal.

    So it really is just a case of;
    - take wipers off
    - pull rubber seal off
    - pull scuttle panel upward at the bottom to lift it over the wiper spindles then pull it out.

    IIRC there is maybe some small pop fittings on the underside of but nothing you need to worry about.
    Last edited by u33db; 14-01-2018 at 14:53.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •