[panic1063]

now then all,

right i understand most of it got my RCA adaptor out and it has four wires coming out labled as follows;

Front right
Rear Left
Ground

and the fourth one is unlabled so im unsure wat it is

also which phono leads do i need to splice the front right and rear left cables in to??

cheers

 

[panic1063]

the unlabeld wire is a brown one

 

[BRAD-H]

Doing mine today as well bud (In The Freezing Cold!), the wires you need to splice are the ones you want to be able to control the balance by....I'm fitting a sub so i did mine to the rear speakers as its in the back of the car. The leads can be indentified by a label of top of the stereo.

have you got a pic or a link of your RCA? Cause mine has Left + and - then Right + and - ....and thats all (but i know some do have ground)

 

[panic1063]

think the rca adaptor could be the wrong one it only has front right + and rear left + :/
this is the one i have http://www.amazon.co.uk/Speaker-Converter-High-Line-Level/dp/B004UA753G/ref=pd_sim_sbs_ce_1
it does have four wires but ones a blank and the other is the ground?!?

any suggestions?

 

[panic1063]

well i feel it was the wrong thing, so ive now ordered a fusion one as this was only a £5er, was gonna go for the Fli one but at £30 thought it was a bit much!! lol hopefully here by end of the week so i can wire the beast up!!

 

[jakeyyboyyyy]

You could have used the original. I had five wires on mine. From memory 4 for the speakers and 1 of them spliced into the ground on the CD player